It is a turbine Multi-jet Super dry water meter for residential application in sizes 15mm and 50mm for cold meter.
1) Magnetic drive,
2) lower transmission resistance Magnetic shield, for external magnetic field protection
3) Sealed dry dial register ensures clear reading
4) Internal strainer, inlet strainer for selecting
5) External Regulating Device
3. Standards Compliance
ISO 4064 Class B for horizontal Installation
4. Optional Features
1) Several lengths and connections available on request
2) Non return valve
3) U. S. Gallon (USG) Cubic Feet (CF) for selecting
4) Reed switch option
5. Working Conditions
Water temperature: <=40C
Water pressure: <=1.6 MPa
6. Installation Requirement
1) Pipeline must be flushed before installation
2) The meter should be constantly full of water during operation
3) The meter should be installed in horizontal with the direction of flow as marked on the body of the water meter.
7. Maximum Permissible Error
In the lower zone from Qmin inclusive up to but excluding Qt is +5%. In the upper zone from Qt inclusive up to and including Qmax is + 2%.